How To Mount External Hard Drive Mac

admin

Mac operating systems are always trusted by users for theirreliability. However, none native NTFS write support is also a feature thatmany users are complaining about. By default, macOS comes with read-onlysupport for NTFS, and its disabled-by-default write support for NTFS isunstable to use. That’s to say, you’re unable to write to NTFS formatted driveson Mac directly.

Here is how to mount an external hard drive on Mac: 1. Click Go at the upper left of your desktop and go to Utilities, then launch Disk Utility on your Mac computer. Click on 'Show All Devices' in View option to list or connected drives. Choose the grayed external hard drive in the left sidebar. Select a file system. Click one of the following options: Mac OS Extended (Journaled) — Select this option if you just want to use your external hard drive with a Mac computer. ExFAT — Select this option if you want to use your external hard drive with both Windows and Mac computers. Mount the external hard drive from disk utility Open disk utility, then select the hard drive from the sidebar. Furthermore, click on the mounting tab and the drive will mount automatically. Repair hard drive from disk utility. Installing macOS Sierra on the external drive. Preparing the hard drive for the installation. Before you install macOS Sierra on the hard drive, you will need to clean the external device. Ensure that there is no important data on your hard drive. Then plug it into your Mac, go to Finder, and select Applications.

IBoysoft Drive Manager is a multifunctional disk management tool with multifarious features. It is one of the most powerful NTFS for Mac mounter, which can mount NTFS formatted external hard drives, USB flash drives, SD cards, etc. IBoysoft Drive Manager grants users with full access to NTFS drives, allowing NTFS write support.

But there is an easy solution provided by iBoysoft Drive Manager so that you can write to, edit, copy-paste, delete, rename files stored on NTFS drives on Mac.

About iBoysoft Drive Manager

iBoysoft Drive Manager is a multifunctional disk management tool with multifarious features. It is one of the most powerful NTFS for Mac mounter, which can mount NTFS formatted external hard drives, USB flash drives, SD cards, etc. on your Macs. iBoysoft Drive Manager grants users with full access to NTFS drives, allowing NTFS write support seamlessly on Mac.

Besides, iBoysoft Drive Manager is also an external drivesand network drives management tool. It supports one-click operation tomount/unmount and connect/disconnect several storage devices. This program willautomatically unmount your disks when your Mac gets into sleep mode to avoiddisk corruption. Meanwhile, it is able to map the network drive as a localdrive as well as offer an efficient way to access FTP servers on Mac.

This software is fully compatible with macOS 10.14 (Mojave),macOS 10.13 (High Sierra), macOS 10.12 (Sierra) and Mac OS X 10.11 (ElCapitan), 10.10 (Yosemite), 10.9 (Mavericks), 10.8 (Mountain Lion), 10.7 (Lion).

How to mount NTFS drives onMac with iBoysoft Drive Manager?

Step 1: InstalliBoysoft Drive Manager

Just like other software, using iBoysoft Drive Manager willstart from installation. It’s pretty easy to do this actually because all youneed to do is to download and drag it to your Applications. It allow users totry for 7 days before you pay for it. After installing this tool, you canlaunch it as normal.

Step 2: Connect NTFSdrives to Mac

When iBoysoft Drive Manager is launched, all connecteddrives will be listed in its drop-down menu. If you have a Microsoft NTFS drivethat you want to use on Mac, you can just simply plug it into the Mac and waitfor it being detected. Once you get a notification from iBoysoft Drive Managerthat your NTFS external drive has been mounted successfully, you can write tothis drive.

Step 3: Write to NTFSdrive on Mac

External Hard Drives

As long as your NTFS external hard drive is mounted byiBoysoft Drive Manager, you can move forward to delete, edit, duplicate, renamefiles on this NTFS drive natively and seamlessly. You don’t have to format thisNTFS drive to make it compatible with Mac and Windows at all.

Note: If you have formatted this drive as someone told you and lose important files, you can search for iBoysoft Data Recovery for Mac to get lost files back from formatted drives.

How To Mount External Hard Drive To Mac

How To Mount External Hard Drive Mac

That’s it, your Mac now is NTFS write supported afterinstalling iBoysoft Drive Manager. Easy, right?

Some people may suggest installing NTFS-3G or Fuse for macOSNTFS driver, but in fact, they are tricky to use. they are prepared for hackersand geeks who are familiar with the command prompt, not common people who caneasily mess up the system. Any improper typing or operation might result indata loss. That’s why iBoysoft Drive Manager is called an easy solution tomount NTFS drives here.

Looking for a way to install and run OS X on an external hard drive? This can be useful for a couple of different reasons. Firstly, it allows you to run another copy of OS X without needing any additional Mac computer.

Also, since you can run a full copy of OS X on the external drive, it can be used for troubleshooting purposes on other Macs or it can be as a kind of virtual OS X. I’ve already written about how you can install OS X in VMware Fusion, but that takes up space on your Mac. Using an external drive, you can save space on your Mac, though it might be a bit slower if you are using USB 2.0.

In this article, I’ll walk you through the requirements and steps to install OS X onto an external hard drive.

Format External Hard Disk

The first thing you’re going to need to do is format the external hard drive properly. The file format has to be Mac OS X Journaled and you have to use the GUID partition map. To do this, open Disk Utility and connect the drive to your Mac.

Under External in the left hand menu, click on your external hard drive and then click on the Erase button. Make sure you backup any data before you erase the drive. When you click Erase, a dialog will pop up where you can configure some options.

Give your drive a name, choose OS X Extended (Journaled) for Format and GUID Partition Map for Scheme. It should only take a minute or two for the drive to be erased and reformatted. Now your drive is ready for OS X.

Install OS X

There are two ways you can install OS X on to your external hard disk: by reinstalling OS X from the OS X Utilities repair screen or by downloading OS X from the App Store and running the installer. I’ll show you both methods in case one isn’t working for you.

The easiest way is to download OS X from the App Store. Once you open the App Store, you’ll see a link on the right for the latest version of OS X (El Capitan as of this writing).

Go ahead and click the Download button to start downloading the installer. Note that if you already have that version of OS X installed, you’ll see a popup message appear asking if you still want to continue or not. Just click Continue.

Once it has been downloaded, just double-click the installer, which will be located in the Applications folder.

How To Mount External Hard Drive Mac Not Recognized

Keep clicking past the license agreement, etc., until you get to the screen that asks you which disk to install OS X on. By default, it is set to MacBook.

Click on the Show All Disks button and you’ll see an icon for the different disks and partitions on the Mac. I named my external hard drive OS X and that shows up in the middle.

You can also tell it’s an external hard disk because it uses the icon with the orange hard drive. Click Continue and then follow the instructions to complete the installation. Note that your computer may restart during the install and you don’t have to do anything. OS X will automatically continue installing onto the external hard drive rather than booting up to your internal version of OS X.

At the end of this article, I’ll show you how to boot up to the external hard drive, so skip down if you ended up using the App Store method. Note that by default, the Mac will start booting up directly to the external hard drive until you change it.

The second method to install OS X is to restart the Mac and press and hold the COMMAND + R keys. This will load up OS X Recovery.

The OS X Utilities screen will appear and here you want to click on Reinstall OS X. Again, you’ll go through some basic screens, but when you get to the hard disk screen, click on Show All Disks again.

How To Mount Internal Hard Drive Mac

Using this method, you’ll have to login using your Apple ID and password so that the entire OS X installer can be downloaded off of Apple’s servers. Whichever method you choose, it will take anywhere from 15 to 30+ minutes to install OS X onto your external hard drive.

While OS X is installing, your computer will restart a couple of times. Note that when it finally boots into OS X, that is the version running off your external drive. To switch back and forth between the internal and external drive, you have to restart your computer and hold down the OPTION key.

When you do that, you should see at least four icons. In my case, I have five because I have Windows installed using Boot Camp. Anyway, the grey MacBook and Recovery 10.11.2 icons are for my internal OS X and the orange OS X and Recovery 10.11.3 are for the version installed on my external drive.

Use the arrow keys to select which drive to boot from and then simply press Enter. If you have a newer Mac and a USB drive that supports USB 3.0, everything should run fairly fast. Overall, it’s a fairly straight-forward process and took me less than an hour to get everything working. If you have any questions, feel free to comment. Enjoy!