Read Write Mac Drive On Windows

admin

By Nathan E. Malpass, Last updated: September 14, 2019

  1. Read And Write Mac Drive On Windows

They're probably formatted NTFS, which Mac OS X can read but not write. You can just reformat the drive as FAT32 (MS-DOS format in Disk Utility) and it will work just fine with both your Mac and Windows systems. First make sure there is nothing valuable on the USB. Go to Disk Utility, which is in Applications/ Utilities. Click on the USB.

Mac operating systems can read NTFS drives formatted on Windows. However, they don’t have the ability to write to them directly. In this article, we’ll give you both free and paid methods of getting total read/write access to that of NTFS drives.

This guide can be helpful when you wish to write to a Boot Camp partition within your Mac as partitions for the Windows system must utilize NTFS. If you need something for external drives, it is recommended that you use exFAT instead of NFTS. macOS can directly read and write to drives using exFAT like Windows do.

Step 2: Plug the NTFS drives on your Mac. Once the drive is detected, a Finder window with its content will pop out. Then you can read and write to NTFS drives as you wish. Solution 2: Use free NTFS drivers FUSE for macOS is the most famous free NTFS driver that can let you extend the list of file systems handled by your computer. I'm on 10.11, I disabled SIP from recovery, then followed all the instructions. Whenever I plug in an NTFS drive, it does mount in /Volumes, and I'm able to use it, but strangely, whenever I unmount it, and plug it in again, it shows up as ' 2', ' 3' etc. Depending on the number of times I. IBoysoft NTFS for Mac features. Microsoft’s NTFS drive is a stranger to your Mac. However, there’s an app that can make them friends. IBoysoft NTFS for Mac is an easy assistant with a full read/write support for NTFS drives. Mount and unmount, manage disks, and share NTFS drives across Windows and Mac.

  • We know that the NTFS file system built into Mac cannot write NTFS drives by default, it can only read NTFS drives. Hasleo NTFS for Mac is a free software primarily designed to help users full access to NTFS drives in Mac, with it you can mount, unmount, read and write NTFS drives easily, safely and seamlessly in macOS & OS X. To full access (mount, read and write) the BitLocker-encrypted.
  • Click on the icon on the Mac's status bar and select the NTFS drive you want to access from the pop-up menu, then click 'Mount'. Notes: If an NTFS volume has been automatically mounted by Mac as read-only, you need to eject it and then re-mount it using Hasleo NTFS for Mac before you can full read-write access to it. When the operation completes successfully, the drive has.

Read And Write Mac Drive On Windows

Three Options to Consider When Writing to NTFS Drives on Your Mac

There are multiple options you should consider when writing to NTFS drives using your Mac device. We will dig into these options later on. Take note that with some options, we’ll give you more than one method of doing it.

Third-Party Drivers (Paid)

Third-party NTFS drivers can be used on your Mac device. Usually, you need to install these drivers and they work perfectly. These paid solutions can be installed easily. Plus, they have better performance relative to free options.

Third-Party NTFS Drivers (Free)

To allow Mac support for writing to NTFS drives, you can opt for free, open-source drivers. They can be difficult to install compared to the paid versions. This is because of Mac’s System Integrity Protection feature. Free drivers are slower compared to paid versions. Plus mounting NTFS partitions automatically in read-write mode can be a threat to your security.

Experimental Apple Support For NTFS-Write

The operating system of Mac offers you experimental support for writing to that of NTFS drives. By default, this support is deactivated. You have to dig into the Terminal to activate it.

Using this method is not guaranteed. Plus, you can even mess around with your NTFS file system and cause issues. Some people who’ve tried it resulted in corrupt data. Thus, it is not recommended to use this method. There’s a reason for it being deactivated by default.

It is recommended that you purchase a third-party driver to write to NTFS drives on Mac as other solutions might be very tedious or dangerous.

Best Paid Third-Party NTFS for Mac: FoneDog’s PowerMyMac

FoneDog’s PowerMyMac is a multifunction tool that allows you to perform a variety of activities on your Mac. Aside from being able to clean your Mac of junk, it can also help youwrite files to NTFS drivesusing your beloved Apple computer.

Below are the steps on how to use this tool to write to NTFS drives on Mac:

Step 01: Download, install and launch PowerMyMac on your computer and select Toolkit.

Step 02: Select NTFS.

Step 03: Press the Write button in order to copy, delete, edit, or perform other instructions on your files from Windows-formatted SDD, HDD, or flash drive.

It is important to remember that when a pop-up window labeled “Fail” is displayed on your screen, it is because you still have to install Osxfuse and NTFS – 3g on your Mac device. This is a prerequisite to using the NTFS tool.

Step 04: Now, you will be able to see USB information located on the left side of the screen. The right column lists the USB’s files and folders. You have to drag the file(s) you wish from the USB to the blank location on the interface.

Step 05: Press the button labeled Write. Now, the files you have dragged into the blank space will be transferred to your USB. Once a message pops up saying the process is complete, then writing to NTFS drives is now done.

Step 06: Unmount the USB drive from your Mac computer.

Now, that’s an easy way of writing to NTFS drives using your Mac. PowerMyMac by FoneDog is our top option as it’s the easiest to use. Let’s get into another paid driver before delving into the free methods for writing to NTFS drives.

Runner-Up Paid Third-Party NTFS Driver: Paragon NTFS for Mac

This tool can be purchased for USD 19.95 and provides you with a free trial for 10 days. It will easily and cleanly install on most recent versions of the Mac OS. For instance, it can be installed on Mac OS X El Capitan version 10.11 and macOS Sierra version 10.12.

It really works and does its job. Thus, it’s our second choice if you’re willing to shell out a small amount of cash to get its feature. With Paragon, you don’t need to fuss about terminal commands just to mount partitions manually, automatically do an insecure mount partition, or handle possible corruption as you might experience with free drivers shown below.

If you really need to write to NTFS drives on a Mac, it is best to pay for the software we have mentioned in this article. We are stressing out that it will definitely be worth it. Also, if you bought a Seagate drive, you can actually have a free download of Paragon NTFS for Mac. Thus, you don’t have to buy anything extra as Seagate offers it for free.

Another option would be Tuxera NTFS for Mac. This tool costs USD 31.00. Plus, they can give you a free trial for 14 days. However, PowerMyMac and Paragon do the same things for more features or cheaper costs.

How to Write to NTFS Drives for Mac For Free: Using FUSE for macOS

This is a free method that requires a bit of effort. Plus, it is less secure. To make your Mac device mount NTFS partitions automatically within a read-write mode, you have to deactivate System Integrity Protection temporarily. Plus, you also need to replace an Apple tool built into the system with a binary. This binary is highly vulnerable to malicious attacks. Thus, doing this is a risk to your security.

But, you can also use FUSE in order to “manually” mount NTF partitions within a read-write mode. This is the case if you’re willing to use the Terminal. This is more secure compared to the one above. However, it requires more work.

The first thing to do is to go to FUSE for macOS website and download it. After then, install the tool on your Mac. During the installation process, select the default options. Then, you’ll also need the command line developer tools of Apple. You can install this by going to Finder and then visiting Applications. After which, select Utilities and launch the Terminal window. In the said window, type the following command:

After this, click Install to begin the installation process.

In addition to the first two installations, you’ll also need to download homebrew if it isn’t in your Mac yet. This is a package manager designed for Mac OS X. Use the Terminal window again to install this package manager. Just type in the following command and then press Enter to start installing it:

After this, press Enter. If it asks for authentication, then type in your password. The script will download and then install Homebrew automatically on your Mac device. Once Homebrew and developer tools are installed using the Terminal window and run the following again in order to install Ntfs-3g:

Now, you can mount NTFS partitions within reading or write mode manually. Run the command below using a Terminal window. In this way, you will create a mount point located at /Volumes/NTFS. This will be done once only.

Once you connect your NTFS drive to the Mac computer, run the command below using Terminal in order to list the disk partitions:

Now, you will be able to determine the device name of your NTFS partition. You simply have to look for the said partition that has the Windows NTFS file system. It is probable that your Mac device has already mounted the NTFS partition automatically. Thus, you have to unmount it before doing anything else.

Run the command below. Replace the /dev/disk3s1 with the actual name of your NTFS partition device.

After unmounting it, you should mount the drive again. To do this, run the command below. Similar to the one above, you should replace /dev/disk3s1 with the NTFS partition device name.

By now, you’ll notice that the file system will be mounted at the location /Volumes/NTFS. It will also be displayed on your desktop as a regular mounted drive. If you wish to unplug the drive, you can eject it through the usual method of doing so.

If you think the above method works for you, then you don’t have to continue reading. However, if you want to use another free method, then read on.

If you want your Mac device to mount NTFS drives automatically within reading or write mode, you have to deactivate System Integrity Protection.

A Word Of Caution

You might not want to perform this method. The official instructions of the software state that this is a risk to your device’ security. When you do this, you will replace your Mac’s NTFS mount tools with that of the NTFS-3g tools. This will run like that of the root user. Because of the actual way Homebrew installs software on your device, the malware within your Mac can overwrite the said tools. It’s not worth it. However, we’ll still explain how to implement this method if you are willing to take risks.

First, you have to reboot your Mac device. Once you are doing so, press and hold the keys Command + R. It will display the recovery mode environment. Go to the utility menu within recovery mode and open the Terminal. Run the command below:

After this, reboot the Mac device again normally. From the desktop, launch Terminal again. Run the commands below in order for NTFS-3g to function:

Finally, reactivate System Integrity Protection. To do this, you simply reboot the Mac, press, and hold the keys Command + R. In this way, your recovery mode will be launched. Open the Terminal within recovery mode and run the command below:

Then, reboot your Mac computer once again. By now, the support for writing to your NTFS drive should be functioning.

In order to undo all changes you have made and also uninstall everything, you have to deactivate System Integrity Protection first. After doing this, run the commands below:

Then, you can simply uninstall FUSE by going to its panel within System Preferences. After this, you should reactivate System Integrity Protection. By now, you’ve realized why we recommend using PowerMyMac’s NTFS tool instead.

Experimental Support for NTFS-Writing by Apple(Free)

This method is the least tested. That’s why we seriously don’t recommend you to do it. We’ve warned you. So, do not put the blame on us or even on Apple especially if you run into issues in the future. This method is unstable and it might never be. The method is just included here for educational purposes.

First, you have to make sure that the drive has a label that uses a single word only. This is for convenience. If it has two words or more, then change it. This will ensure that the process becomes easier.

Visit Finder and then go to Applications. Then, go to Utilities and open Terminal. Type the command below using the Terminal. In this way, the /etc/fstab file will be opened. The said file will be used to edit within a nano text editor.

The line below should be added to nano. Replace the word “DEVICENAME” with your NTFS drive’s label:

Once you’re finished, press the keys Control + O in order to save the said file. After this, press Control + X to exit nano. If you wish to write to more than one NTFS drive, simply add another line for each one.

Now, you should connect the NTFS drive to your computer. If it is already connected, just unplug it and plug it back again. You should be able to see it within the directory “/Volumes.” To do this, use a Finder window and press Go. After this, click Go To Folder. Type out “/Volume” within the box to gain access to it. Typically, it will not be automatically displayed within Desktop like that of normal drives.

Read write mac drive on windows 10

Later, you can simply undo the change you’ve made. Simply repeat the process above to launch the /etc/fstab file within nano. The line, you’ve placed in the file? Just delete it and save the new changes.

In Conclusion

This guide is here to help you learn how to write to NTFS drives on Mac. Both free and paid methods were outlined here. It is recommended that you opt for the paid methods (e.g., PowerMyMac) in order to get this feature. In this way, you don’t have to risk the performance of your Mac and even potentially face file corruption.

>Tricks >How To Write To NTFS Drives For Mac: Free And Paid Methods
  • 1. Mac Files Tips
  • 2. Mac Software
  • 3. Mac Storage Tips
  • 4. Mac Troubleshooting
  • 5. Mac OS

by Anna SherryUpdated on 2019-11-30 / Update for Mac OS

One of the major differences between a Windows computer and a Mac is that they often use different file systems for their devices. Windows mostly uses NTFS whereas Mac uses FAT or its own file system. Since both use different file systems, you cannot write to NTFS drives on a Mac. You can write to a FAT file system on a Windows computer, though.

Drive

Apple does not natively support writing data to NTFS drives on a Mac, however, there are some ways to do the same but they may not always work normally. Our guide below shows how to use NTFS for Mac and write data to it from your machine.

Way 1. Write to NTFS Drives on Mac with Paragon NTFS for Mac

Since your Mac does not have an official option to write data to NTFS drives, you are forced to use a third-party app to get the job done. If you do a quick Google search, you would come across many software claiming to help you with the Mac OS NTFS write task. Many of those are false claims and the software do not work as they are supposed to.

Fortunately, there is one that works exactly the way it should. It is called Paragon NTFS and it allows you to work seamlessly with the NTFS drives attached to your Mac.

It is a paid software, but it gives you ten days of free trial for you to check out its features. If you like it, you can then purchase a license to continue using the software. The following is how it works on a Mac.

Step 1. Head over to the official Paragon Software website and download and install the software on your Mac.

Step 2. Restart your Mac to bring changes into effect on your system.

Step 3. When your Mac restarts, you will find all of your attached NTFS drives showing up in Finder on your Mac.

You may then add whatever data you want to your drives that use NTFS file system. That is how you perform a Mac NTFS write operation on your machine.

Way 2. Enable NTFS Writing on Mac Using Apple's Experimental NTFS-Writing Support

Apple has an experimental feature to let you write data to your NTFS based drives. However, it is highly discouraged that you use the feature to write data. The feature is still in experimental mode and it may cause data corruption or data loss on your drives.

If you would like to give the method a try despite knowing its disadvantages, the following should help you do it. To be on the safer side, create a backup of your NTFS drive if you have stored your important files on it. Performing the following operation may result in you losing your valuable data on your drive.

Step 1. Make sure your NTFS drive uses a single word label. Disconnect your drive from your Mac.

Step 2. Click on Launchpad in your Dock and search for and click on Terminal. It will launch the Terminal app on your Mac.

Step 3. When the Terminal app launches, type in the following command and press Enter.

Mac Mount Ntfs For Writer

sudo nano /etc/fstab

Step 4. A file will open in an editor on your screen. Add the following line to the file and save the file by pressing Ctrl + O. Replace YOUR with the label of your NTFS drive.

LABEL=YOUR none ntfs rw,auto,nobrowse

Step 5. Finally press the Ctrl + X key to close the editor. Connect your NTFS drive to your Mac and you will find it in /Volumes ready to add data.

There you go. That is how you use Apple's experimental NTFS write method to add data to a NTFS based drive. It is a NTFS for Mac free tool to use on your Mac.

Extra Tip: How to Recover Lost Data from NTFS Drive

If the experimental feature did not work well, you may face a data loss situation on your NTFS drive. If this has happened, you may want to recover the data saved on your drive.

Since the data has been deleted from your drive, you cannot use any of the built-in options on your Mac to recover the data. Fortunately, there is a third-party software called Tenorshare 4DDiG for Mac Data Recovery to help you recover the data on your drives.

The software specializes in helping users recover data from various data loss scenarios. It has support for multiple file systems, can recover data from external drives, and is extremely easy to use. The following is how you use it to recover your data.

Enable Ntfs Write On Mac

Step 1 Connect your NTFS drive to your Mac and download, install, and launch the software on your Mac. When the software opens, click on your NTFS drive and hit the Scan button.

Step 2 Let the software scan your drive to recover files. When the results appear, select the files you would like to recover and click on Recover.

Step 3 Choose a folder where you would like to save the recovered files.

Mac Os Mount Ntfs Write

You are done. Your chosen files will be recovered from your NTFS drive and saved to your Mac.

You may also be interested in How to Recover Data from APFS Drive.

Conclusion

While it is easy to read NTFS on Mac, it is almost impossible to write data to a NTFS drive on a Mac. Despite being hard, we have shown you the methods to write data to your NTFS drives from your Mac. We hope it helps you out.

Install Windows on your Mac

Boot Camp is a utility that comes with your Mac and lets you switch between macOS and Windows. Download your copy of Windows 10, then let Boot Camp Assistant walk you through the installation steps.

  • Apr 28, 2016 To use HFSExplorer, connect your Mac-formatted drive to your Windows PC and launch HFSExplorer. Click the “File” menu and select “Load File System From Device.”. It will automatically locate the connected drive, and you can load it. You’ll see the contents of.
  • Sep 13, 2014 For sale is a new original MacDrive 9 Standard software for reading Mac formatted drives from a Windows PC. This is a new unused OEM version of the software.
  • Jun 22, 2018 This is due to the fact that NTFS, the file system utilized by Windows PCs, has limited support on Mac. While you can read files from these drives just fine, if you need to write to a PC-formatted hard drive, you'll need some third-party software to get the job done. Here are the tools you can use to work with NTFS-formatted drives on your Mac.

Unlike HFSExplorer, Paragon HFS+ for Windows provides full read/write access to Mac drives and promises high performance. It even integrates HFS+ file systems with Windows Explorer or File Explorer on Windows. Any Windows program can read from or write to the Mac drive. The app costs $19.95, but it also offers a 10-day free trial.

Update AMD graphics drivers for Windows in Boot Camp

Download and install the latest AMD graphics drivers for Windows on Mac models that use AMD graphics.

Update AMD graphics drivers for Windows

Use your Apple keyboard in Windows

You can use an Apple keyboard or a keyboard designed for Microsoft Windows with your Mac. Many of the keys that you'd see on a PC have equivalent keys on an Apple keyboard.

Learn more about keyboards and Boot Camp

Resources

Read Mac Hard Drive On Windows 10

Have a question? Ask everyone.

The members of our Apple Support Community can help answer your question. Or, if someone’s already asked, you can search for the best answer.

Ask now

Software To Read Mac Hard Drive On Windows 10

Tell us how we can help

Answer a few questions and we'll help you find a solution.

Read Mac On Windows

Get support